Used UT.MA P-20 Profile Grinder

The machine has been stripped down and painted and has been completely refurbished. It has had the spindle rebuilt and various components have been rebuilt. This machine is for cutting tools up to 300 mm. in diameter and profile lengths up to 250 mm. Profiles HSS moulder knives, carbide inserts, brazed cutters, L/R hand router bits, & raised panel cutters. Rigid frame construction supports a 3HP grinding motor. Unlimited side clearance increments from 0 to 25°. Fully adjustable for back clearance angles from 0 to 45°. Complete with a router bit attachment and a Vitrified wheel dressing attachment.

Techincal Specs: Max. Tool Length 250mm (10”) 14” optional Max. Tool Diameter 300mm (11.8”) Grinding Motor 3 HP Side Clearance 0 to 25 degree Grinding Wheel Diameter 250mm (10”) Grinding Wheel Bore 1” Voltage 220/440V, 3Ph, 60Hz Weight 950 lbs

$ 15,750.00

Rebuilt 1987 Akemat UT5 Top Grinder # 837

Completely rebuilt from top to bottom, Newly podwer coated. Excellent top grinding machine. For saws up to 28”(40” optional), 0.9kw grinding motor, double bar slide, 220/440 volt, 3 phase, 60 cycle, Full flood coolant and magnetic saw clamping. Complete with 24 built in programs including triple chip in one pass. Complete with 9 piece centering collar set (1/2”, 5/8”, ¾”, 1”, 1-1/8”, 30mm, 1-1/4”, 1-3/8” and 1-1/2”) and 4 cams (150mm, 250mm, 350mm, 450mm) and set of tools and one top grinding wheel.

Complete with 1 year warranty.

$ 39,500.00

1988 Akemat UT5 - # 906

Excellent used machine - triple chip in one pass

For saws up to 28”(40” optional), 0.9kw grinding motor, grinds using a 5” periphery wheel, 220/440 volt, 3 phase, 60 cycle, Complete with hydraulic infeed infinitely variable for one pass grinding method via DC drive over roller ball spindle and full flood coolant with double filtering system and magnetic saw clamping. Complete with a 9 piece centering collar set (1/2”, 5/8”, ¾”, 1”, 1-1/8”, 30mm, 1-1/4”, 1-3/8” and 1-1/2”) and 4 cams (150mm, 250mm, 350mm, 450mm) and set of tools and one diamond wheel.

$ 13,500.00

1986 Akemat UT5 - # 664

Excellent used machine - triple chip in one pass. All the following work has been done to this machine:

Rebuilt 5” index unit, New double magnet,Vertical slides removed and cleaned and re-greased, New seals in center position cylinder,replaced DC motor, One hydraulic valve replaced & Hydraulic oil changed, New capacitor and rectifier, Index pivot system rebuilt with new bearings and seal, Saw post assembly pivot rebuilt with new seals, New coolant pump, machine lamp. We can add a double bar slide retofit for an additional charge.

$ 15,000.00